Search This Blog

Tuesday, May 29, 2012

Ultimate Menu Board

 
HOW TO MAKE THE ULTIMATE MENU BOARD

You will need-
11x14 picture frame
2 sheets of decorative 12 x 12 scrapbook paper
2-3 additional coordinating decorative papers
several sheets of solid colored card stock (for meal cards and pockets)
7 clothespins
the boxes from two 16 ct crayon packs
Elmers glue
Hot glue gun and glue
letter stickers (for title)

Meal cards---
Preparatory to using your board, gather several meal ideas (I have about 35) and their recipes. Make a 2 column word document- typing your menu on one side of the page and the ingredients in the column next to it. You should have room to print about 5 menus/ingredients per piece of printer paper. After printing, cut the meals/ingredients out into strips and fold each strip in half, giving you a front and back. Laminate the cards. I used self-laminating paper which worked okay but not perfectly. (Because I didn’t leave much empty space around each card, some of my cards did not seal well all the way around. If I did it again, I would have them done professionally or with the use of a heated laminator.) My cards measure 1 ½ inches tall and then half of the width of an average size paper (4.25 inches) across.


Frame Background
Trim the decorative scrapbook paper to fill your frame. You will use one full sheet and just need a couple of inches of a second piece of paper in order to fill the entire frame. Where the two sheets overlap, place a thin piece of coordinating paper across the width to hide the seams. Put the title above that line using scrapbooking letter stickers. Place in the frame. Secure the background into the frame. Everything else will be done on top of the glass.

Clothespins
Trim strips of paper to fit on top of your clothespins. Using a mixture of 1 part elmers glue to one part water (homemade mod podge,) brush the glue onto the clothespin, place the paper on top and add more of the glue mixture. I think I did about 3 layers of the glue. When the clothespins are dry, you may add the days of the week to each pin if you choose. I punched out little circles and just used the letters m, t, w, etc to designate the day of the week. Space your clothespins evenly along the left hand border of your frame and hot glue them into place.

Pockets-
I used 16 count crayon boxes as the base for my pockets. Turning the box horizontally, cut out one long side- this will be the opening of your pocket. Lay the box out flat onto a piece of card stock and trace it. Cut the card stock out and glue it on top of the crayon box—making folds to match the boxes folds as you go. Reassemble the box, gluing or taping together the open sides. I left just about a half inch extra along the long sides so I could wrap my paper over the top edges of the box for a smoother look. After assembling your boxes, cut a strip of coordinating paper to use as an accent and glue around the pocket. Hot glue the pockets directly onto the glass of your frame.

No comments:

Post a Comment